Russell-K RED100 Walnuss | Front schwarz

RUSSELL-K | RED 100

Russell K Red 100 | Präzisions-Audio-Lautsprechersystem

The Red 100 was the first loudspeaker designed by Russel K. and has since then won the hears of many HiFi reviewers and customers.

Alan Sicrom of Hifi+ puts it like this: “I think the reason the Red 100 works so well is it combines the twin demands of both timbre and tempo exquisitely, highly recommended.”

Russell-K RED100 schwarz | Front schwarz

Technische Daten

Cabinet

Construction 16mm MDF all sides apart from front baffle which is 19mm
Totally undamped cabinet
2 acoustic loading bracing shelves with multiple apertures mounted above and below the woofer
Reflex port loading tuned to 35Hz

Drive Units

6.5” Bass unit with impregnated paper cone and curved optimised acoustic profile
High power Ferrite magnet driving a 25mm voice coil with aluminium former and Faraday distortion cancelling copper ring
25mm soft dome tweeter
Double Ferrite magnet system
Copper Clad Aluminium voice coil wire on a Fibreglass Former and Faraday distortion cancelling copper ring

Crossover

Drivers connected in positive phase, crossover frequency 2200Hz nominal 12 db/Oct
Bass Inductor “Enclosed Field Ferrite Core” Very low DCR nominal stray fields
Tweeter attenuation by misaligned Zobel network as opposed to conventional L-Pad
Both Drivers have only one component in the signal path
Phase optimised through the crossover region
In room frequency range 30Hz-20KHz

Abmessungen HxBxT: 400 x 260 x 270 mm

Zusätzliche Informationen

Farbvarianten	Eiche hell \| Front weiß, Eiche schwarz \| Front schwarz, Walnuss \| Front schwarz

Farbvarianten

Leeren

Quantity

Testberichte und Infos

Russell-K RED100 Testbericht Audio und Stereoplay 02-2024

AUDIO&STEREOPLAY | Russell K. “A new kid on the block”

Ausgabe 02/2024